28-03-2021

Cubase Usb Elicenser Emulator

  1. Cubase Usb Dongle
  2. Elicenser Usb Key

Last Update: 2/13/2015

Cubase AI : Program Installation Does Not Create a Soft-eLicenser Number

Feb 24, 2012 AiR eLicenser Emulator Setup Refx Nexus Update Crack Key Nexus-Elicenser. ELicenser, Keys. Steinberg Cubase. Steinberg Key Usb Elicenser Emulator. Download the latest eLicenser Control Center Most issues with Soft-eLicensers or USB-eLicensers, activation codes and licenses can easily be solved by installing the. I get crazy to activate my products, but it was simple. GO DIRECTLY AT: 03:19 and You will find the solution.


NOTE: the number is 2 ten digit strings of numbers and letters dived by a hyphen.
PLEASE NOTE: This FAQ was intended for customers that purchase and use their products in the United States (not including territories) only. If you live outside the U.S., please go to www.yamaha.com, select your country or region from the drop-down menus and contact your local Support team for help. Yamaha Corporation of America will not be able to help you activate your software if you're outside the U.S.

Licenses for many Steinberg programs are stored in the so called Soft-eLicenser, a virtual license container on the hard disk. In the eLicenser Control Center - the license managing tool used by all Steinberg programs - the Soft-eLicenser is represented by a hard disk symbol. Each Soft-eLicenser has an unique number which is required for the program activation.

Problem

In rare cases, the Soft-eLicenser cannot be created during the installation. If the Soft-eLicenser is missing the activation code needed for the permanent activation of the program cannot be requested. Downloading licenses is also not possible without a Soft-eLicenser (unless an USB-eLicenser is connected).

Usb

Solution

The solution requires three steps:

1. Uninstalling the program you want to activate (for example, Cubase Elements).
2. Running the 'eLC Installation Helper'. This little tool creates the condition for a successfull reinstallation.
3. Reinstalling the program you want to activate.

Please follow these instructions:

Mac

1) Close all programs.

2) Uninstall the program you want to activate by moving it from the Applications folder to the Trash.

3) Download this file: 'elc-installation-helper.zip'

CAUTION: Only use the special installer if you cannot proceed the activation due to a missing Soft-eLicenser! The eLC Installation Helper will delete an existing Soft-eLicenser and all contained licenses without recall!

4) Unzip the downloaded file and run the contained program 'eLC Installation Helper.app' by double-clicking on it.

5) Click on 'Uninstall' and enter your password.
6) Finally, re-install the program you want to activate as usual.

Next time you start the eLicenser Control Center the newly created Soft-eLicenser will be displayed.

Windows

1) Close all programs.
2)Uninstall the program you want to activate via Windows Control Panel:
  • Windows XP: Control Panel > Add or Remove Programs
  • Windows Vista, Windows 7, Windows 8: Control Panel > Programs and Features
3) Download the eLC Installation Helper:
  • Windows 7, Windows 8: Download 'elc-installation-helper.exe'
  • Windows XP, Windows Vista: Download 'elc-installation-helper-xp.exe'
Caution: Only use the eLC Installation Helepr if you cannot proceed the activation due to a missing Soft-eLicenser! The eLC Installation Helper will delete an existing Soft-eLicenser and all contained licenses without recall!

Cubase Usb Dongle

EmulatorElicenser

4) Double-click on the downloaded file to start the reinstallation of the eLicenser Control Center.
5) Please note that the eLC Installation Helper can only be executed if your Windows user account has administrative rights! If you are logged in to an Windows user account with limited rights you will be promted to provide an administrator's username and password.
6) Finally, re-install the program you want to activate as usual.

Next time you start the eLicenser Control Center the newly created Soft-eLicenser will be displayed.

If the eLC Installation Helper failed to create a Soft-eLicenser the 'Data Execution Prevention' of Windows might be the reason. Please check its setting according to this instruction:

1) Open the Windows Control Panel.

2) Windows XP: Click on 'System'; Windows Vista, Windows 7, Windows 8: Click on 'System and Security', then on ' System' and finally on 'Advanced system settings' in the list of options to the left.

3) The window 'System Properties' pops up.
4) On the 'Advanced' tab click under 'Performance' on 'Settings...'.

5) The window 'Performance Options' pops up.

6) On the 'Data Execution Prevention' tab make sure the 'Turn on DEP for essential Windows programs and services only' is selected!

Elicenser Usb Key



7) Close the window by clicking on 'OK' and, if prompted, restart your computer.

8) Finally, run the eLC Installation Helper once again following the instruction above.
motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, audiogram, mw, n12_n8, 01v96vcm, mw, n12_n8, motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, mg_series_usb_models, 01v96vcm, 02r96vcm, dtx900, dtx-m12, pocketrak_2g, 01v96, 02r96, pocketrak_c24, pocketrak_w24, 02r96vcm, mg_series_usb_models, pocketrak_cx, tyros4, motif_xf, motif_xf, 01v96v2, dtx700_series, mox_series, mox_series, 01v96i, psr-s750, psr-s950, mx, mx, kx, pr7, sy-moxf, sy-moxf, tyros5-61, tyros5-76, mg_xu_model, bags_and_cases, ur_series, sy-motif_xf_wh, sy-motif_xf_wh, mox6, mox8, mox6, mox8, mg166c-usb, mg166cx-usb, mg206c-usb

motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, audiogram, mw, n12_n8, 01v96vcm, mw, n12_n8, motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, mg_series_usb_models, 01v96vcm, 02r96vcm, dtx900, dtx-m12, pocketrak_2g, 01v96, 02r96, pocketrak_c24, pocketrak_w24, 02r96vcm, mg_series_usb_models, pocketrak_cx, tyros4, motif_xf, motif_xf, 01v96v2, dtx700_series, mox_series, mox_series, 01v96i, psr-s750, psr-s950, mx, mx, kx, pr7, sy-moxf, sy-moxf, tyros5-61, tyros5-76, mg_xu_model, bags_and_cases, ur_series, sy-motif_xf_wh, sy-motif_xf_wh, mox6, mox8, mox6, mox8, mg166c-usb, mg166cx-usb, mg206c-usb
motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, audiogram, mw, n12_n8, 01v96vcm, mw, n12_n8, motif_es, motif_es_power_pack, motif_es6, motif_es7, motif_es8, motif6, motif7, motif8, motif_xs, mm, mo, s90_xs_s70_xs, mg_series_usb_models, 01v96vcm, 02r96vcm, dtx900, dtx-m12, pocketrak_2g, 01v96, 02r96, pocketrak_c24, pocketrak_w24, 02r96vcm, mg_series_usb_models, pocketrak_cx, tyros4, motif_xf, motif_xf, 01v96v2, dtx700_series, mox_series, mox_series, 01v96i, psr-s750, psr-s950, mx, mx, kx, pr7, sy-moxf, sy-moxf, tyros5-61, tyros5-76, mg_xu_model, bags_and_cases, ur_series, sy-motif_xf_wh, sy-motif_xf_wh, mox6, mox8, mox6, mox8, mg166c-usb, mg166cx-usb, mg206c-us

Done! You've provided all information that is relevant for reselling your product.

Your information

The information on the product you are planning to sell:

  • The software already has been registered with a MySteinberg account on www.steinberg.de/mysteinberg.
  • It is copy protected by a USB-eLicenser.
  • The USB-eLicenser is holding multiple licenses.

If you want to correct information please click on the 'Back' button of your browser.

Required steps before selling

At first it is necessary to separate the license of the program you are planning to sell from the other license(s) on the USB-eLicenser. For this purpose the eLicenser Control Center is providing the possibility to transfer licenses from one USB-eLicenser to another.
You can get empty USB-eLicensers from any Steinberg dealer. Within most European countries USB-eLicensers are also available in our online shop. If you are not resident in the scope of the online shop please contact your local distributor.
For the license transfer you'll need at least two USB-eLicensers (a source and a target key). These are the necessary steps in detail:

  • Please install the latest version of the eLicenser Control Center before you start the transfer!
  • Open the eLicenser Control Center (Windows: Start > Programs > eLicenser, Mac: Applications).
  • Connect both USB-eLicensers. They will be listed in the eLicenser Control Center.
  • Click on the license you want to sell to grab it and drag it to the entry of the other USB-eLicenser while holding down the mouse button.
  • Release the mouse button to start the license transfer.

Once the transfer is completed the new USB-eLicenser should hold the license of the program you are planning to sell. Since the new USB-eLicenser has not been registered you can sell it combined with the corresponding installation disc(s) and manual(s) as unregistered software.
Of course a license can also be transferred directly to a USB-eLicenser provided by the buyer.
In both cases it is not necessary to inform the Steinberg support team. The registration in your MySteinberg account will be updated automatically.

Recommended scope of supply

A complete offer should include:

  • Installation Media
    • If you want to sell a boxed version, make sure to include the original installation disk(s) (CD, DVD).
    • If you want to sell a product you've received as download (for example, via Download Access Code or by purchasing online), you need to provide the buyer with a backup of the installation file on CD, DVD or, for example, on a USB flash drive.
    • In case you don't have a CD, DVD or a downloaded installer, please contact our support team before offering the product for sale.
  • Important: unregistered USB-eLicenser holding the corresponding license!
  • manual(s)
  • original box